Create removeable temporary tattoos from home with our printer paper

Temporary Tattoo Paper!

Tattoo Paper is specially designed to create your own personal temporary removable skin tattoos. This removable tattoo paper can be used easily with an ink jet and/or laser printer. Removable tattoos can now be made with your own custom design, artwork, or logo in a very short time. This removable tattoo paper for inkjet / laser tattoos is easy & fun to use and the creative possibilities are endless! We are offering you ways to create your own Temporary Tattoos. By using this product, you can make handsome tattoos for yourself, your family, your friends and your dolls

These special water slide temporary tattoo paper sheets are specially made for use in laser and/or inkjet printers. It is recommended that your try your designs on plain paper first before using the water slide removable tattoo paper. Doing this will insure that your design is to your satisfaction before you try it on the water slide temporary tattoo paper. This water slide temporary tattoo paper should be fed into your printer one sheet at a time. It should be fed in alone. No other paper should be present in your printer. Do not store your water slide skin tattoo paper in humid or hot places.

How to PRINT:

Set your printer on: *Plain Paper
*Normal Quality
*Portrait Mode To print your designs, follow the instructions for regular printing, Remember to use this water slide skin tattoos paper with inkjet or laser printers only. Make sure that you allow the printed sheets of removable skin tattoo paper to dry completely before you touch them.

Application:

1. Wait until ink is fully dry (about 2 to 3 minutes) before you touch the special water slide temporary tattoo paper.
2. Remove the f irst side of the adhesive sheet and apply it to the printed side of the tattoo set. Be careful to remove all air bubbles.
3. Use your scissors to cut around each tattoo design, keeping as close as possible to the tattoo. 4. When choosing a place to apply your skin tattoo, you should choose one that is free of body hair.
5. Wash the elected area and dry thoroughly. Skin should be dry when the temporary tattoo is applied.
6. Make sure your hands are dry before removing the second side of the adhesive backing. Apply the tattoo to your skin and press ...firmly for 20 seconds.
7. Wet the release liner with a slightly wet sponge for 60 seconds. When the paper is thoroughly wet (you will be able to see the tattoo ...image through the water slide decal paper), remove the release liner to reveal the temporary tattoo.

Removal:

1. Temporary skin tattoos should not be worn more than 24 hours and should be kept dry.
2. To remove the temporary skin tattoo, with your nail, lift one corner off the skin.
3. Temporary skin tattoos may not be suitable for highly sensitive skin types.